Skip to main content

Support

Phone Setup / Apple


Apple iPhone - Internet and MMS (iOS Version 6 or Later)

  1. Go to "Settings", tap on WiFi and temporarily turn it OFF
  2. Back in "Settings", scroll down to "Messages" and tap to open it. Make sure MMS is OFF
  3. Go back to "Settings", tap on "General" and then "Cellular". Make sure "Enable 3G" is OFF & "Data Roaming" is ON.
  4. Scroll down & tap on "Cellular Data Network"
  5. Under "Cellular Data Network" put in the following:
    • Cellular Data APN: pwg
    • MMS APN: pwg
    • MMSC: http://pwg.mmsmvno.com/mms/wapenc
    • MMS Max Message Size: 1048576
    • MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
    • Leave all other fields blank
  6. Click on the Home button to go back to the main phone screen
  7. Go back to "Settings" one more time, scroll down and tap on "Messages" and turn it ON
  8. Press the Home button and you're set to send & receive MMS on PWG
  9. Once you have set it up and tested to see it works, you can re-enable WiFi, turn off Data Roaming and turn on 3G

Apple iPhone - Internet and MMS (iOS Version 5 or Earlier)

Cellular Data

  1. Select Settings.
  2. General Settings.
  3. Select Network.
  4. Select Cellular Data Network.
  5. Select APN.
  6. APN: pwg
  7. Username: Blank
  8. Password: Blank

MMS

  1. APN: pwg
  2. Username: blank
  3. Password: blank
  4. MMSC: http://pwg.mmsmvno.com/mms/wapenc
  5. MMS Proxy: 216.155.165.50
  6. MMS Message Size: 1048576
  7. MMS UA Prof URL:http://www.apple.com/mms/uaprof.rdf